Feed loading systems

SILOS

Corrugated silos

The silos are made of sturdy galvanized horizontal corrugated sheets bands with the bottom rings 10/10 mm thick and all the others 8/10 mm thick.

Features:

  • sealed junctions to water proof the silo
  • ladder with safety protection
  • galvanised supporting legs
  • Lower cone with 67° slope
  • open able trap door on the roof and cover
  • Piping for pneumatic loading

Steel silos are offered fully fitted with all accessories and are available from 9,6 to 35,2 m3 of volume.

They are corrosion free and sealed against any water infiltrations. Available also with isolation and covering for hot climates.

Plain sheet silos

The silos are made of sturdy galvanized horizontal plain sheets bands with the bottom rings 10/10 mm thick and all the others 8/10 mm thick.

Features:

  • sealed junctions to water proof the silo
  • ladder with safety protection
  • galvanised supporting legs
  • Lower cone with 67° slope
  • open able trap door on the roof and cover
  • • Piping for pneumatic loading

Steel silos are offered fully fitted with all accessories and are available from 18,3 to 41,3 m3 of capacity.

They are corrosion free and sealed against any water infiltrations. Available also with isolation and covering for hot climates.

Fiberglass silos

Made of special fiberglass , light and tight sealed to avoid water infiltration, high mechanical resistance and insulation. Long lasting, they don’t corrode or rust and are maintenance free. Different versions and capacities ranging from 5,5 ton to 31,5 ton covers the full range for feed storage.

Optional and additional equipment for silos

  • – VIBRATOR FOR SILO: The vibrator can be installed on different types of silo. For each type of silo there are different brackets to fit onto the silos. Motor 2800 rpm voltage 200-380-415V 0,12 HP.
  • – LOADING AUGER 150 mm: The loading auger has a hopper with a capacity of 80kg made of painted steel with thickness 20/10 mm. Motor 1400 rpm voltage 200-380-415V 3-4 HP according to the length of the auger and height.
  • – ISOLATION OF SILO FOR HOT WEATHER: Outside coating of the silo with alluminium sheet 8/10mm thick creating an air chamber of 100 mm. Only for SY silo models.
  • – PNEUMATIC LOADING PIPE: Loading pipe for pressure loading from trucks.
  • – MOTORIZED SHUTTER FOR SILO OUTLET: Loading

AUGERS

Chain Augers

The chain augers are the optimum way to convey any type of feed from the silos to the installation. The advantage of using chain augers is that you can place the silos in any position on the outside of the house and a minimum distance from the house because we can perform with the auger and corners different kinds of runs. Being a chain auger there is no problem having vertical pipe solutions and maintenance e down time for maintenance is very low and replacing or cutting a piece of chain is very simple and fast.

Quality Automation Equipment & Systems for Egg & Chicken Farms